Our release notes offer brief, high-level descriptions of new features, enhancements, and resolved issues. Detailed information on the features, their setup, and configuration are available in the Amp Impact Knowledge Base (specific links below).
Contact support@verasolutions.org to share feedback.
This page covers:
Feature Enhancements
Enhancements to Project Indicators with Numerator/Denominator data type
Download/upload Targets and Results
Functional Documentation:
Link
Technical Documentation:
Link
In the previous release of Amp Impact (Mira, v1.37), we introduced the Numerator/Denominator data type Indicators. Users can now use Targets and Results templates to set targets and report results of Project Indicators with Numerator/Denominator data type.
<Add Images>
Indicate out-of-bounds results with validation ranges
Functional Documentation:
Link
Technical Documentation:
Link
Users can now set validation ranges for Numerator/Denominator data type Indicators to indicate if the reported results are within the expected range.
<Add Images>
Quickly gauge indicator performance with stoplights
Indicator management functionality in Amp Impact enables users to set stoplights indicating if the reported results have met targets for quantitative (number, percent, currency) Indicators. This functionality has now been extended to support Numerator/Denominator data type Indicators.
<Add Images>
View indicator performance on performance graphs
Numerator/Denominator data type Indicators are now supported on Performance Graphs.
<Add Images>
Read indicator definitions in your language with multi-language support
Functional Documentation:
Link
Technical Documentation:
Link
Multi-language capacity in Amp Impact allows organizations to enter data like Indicator definitions and descriptions in multiple languages and show that data to users across geographies in the relevant language. With Nashira (v1.38), this capability now extends to Numerator/Denominator data type Indicators.
<Add Images>
Easily refer to the calculation factor while setting targets and reporting results
Functional Documentation:
Link
Technical Documentation:
Link
Users can now refer to the calculation factor while setting targets and reporting results improving the user experience of working with Numerator/Denominator data type Indicators
<Add Images>
Show only relevant options in lookup dropdowns in Lightning components
Functional Documentation:
Link
Technical Documentation:
Link
The lookup dropdowns in Lightning components now allow system admins to specify lookup filters and display only relevant options to users. This enhances user experience by minimizing clutter, improving search efficiency, and ensuring more accurate selections.
<Add Images>
Show the relevant field as the label of lookup dropdown options in lightning components
Functional Documentation:
Link
Technical Documentation:
Link
Lookup dropdown options in Lightning components now display the relevant field as the label, providing clearer context for selections. This improves usability by making it easier for users to identify the correct option at a glance
<Add Images>
Always show updated data to users by refreshing lightning components from custom flows
Functional Documentation:
Link
Technical Documentation:
Link
Lightning components now allow system admins to automatically refresh them from custom flows and display updated data, ensuring users always see the most current information. This improves data accuracy and enhances the overall user experience by eliminating the need for manual updates.
<Add Images>
Streamline the review process by keeping the submitted lightning components unlocked for specified users
Functional Documentation:
Link
Technical Documentation:
Link
The system admins can now streamline the review process by allowing submitted Lightning components to remain unlocked for specified users based on custom permissions. This enables seamless collaboration, as designated users can make updates or changes without the need to unlock and resubmit the component.
<Add Images>
Validate the submission responses from quick actions
Functional Documentation:
Link
Technical Documentation:
Link
The Submission response form is now validated if it’s being submitted from quick actions. This ensures that correctly filled Submission response forms are submitted even if the form is submitted from a quick action or flow.
<Add Images>
Resolved Issues
Financial Management
Load more data with budget download/upload functionality
INDMP-7952 - Getting issue details... STATUS
When a repoting period is updated to be not available for financials, it is not shown in the downloaded template anymore
INDMP-7881 - Getting issue details... STATUS
Flow labels and names have been updated to follow best practices of naming convention
INDMP-3762 - Getting issue details... STATUS
Frameworks, Indicators, and Results Management
Parent objective filter now works correctly while adding objectives from the catalog
In previous versions of Amp Impact, the filtering functionality for the Parent Objective field when adding Objectives from the catalog was not working as expected. This issue has now been resolved, and users can successfully filter the table using the Parent Objective field.
INDMP-10539 - Getting issue details... STATUS
Results of numerator/denominator project indicators are updated to reflect the updated calculation factor
In the previous version, editing the Calculation Factor for a Numerator/Denominator Indicator did not update the hover values correctly for updated results. This issue has been resolved, and the correct values now display while hover over the result value on Add Results LWC after editing the Calculation Factor.
INDMP-10960 - Getting issue details... STATUS
If the updated aggregation criteria have no matching records, the updated results are correctly set to zero or blank
In earlier versions of Amp Impact, when the the aggregation setting filter criteria was updated such that there were no records that matched the updated filter criteria, the updated results for these indicators showed previous results instead of zero. This has now been resolved
INDMP-8691 - Getting issue details... STATUS
Packaged picklist fields now support filtering indicators in other languages
In earlier versions, filtering the Manage Indicators LWC by "Type of Results," "Geographical Disaggregation," "Calculate Total," and "Reporting Frequency" fields in Spanish and Portuguese did not display accurate results. This issue has now been resolved, and these fields can be used correctly to filter the Selected Indicators table on Manage Indicators LWC.
INDMP-11266 - Getting issue details... STATUS
Project indicators with updated disaggregation groups are now displayed as options while specifying the calculation criteria
In previous versions of Amp Impact, on editing a calculated Indicator by adding a custom Disaggregation Group to it, the Indicators available for selection on the "Customize Calculation" screen did not align with the updated criteria. This has now been resolved.
INDMP-11288 - Getting issue details... STATUS
Project Indicators with deleted junction records to reporting period records are now accomodated in the targets download template
In the previous version of Amp Impact, when Project Indicator Reporting Period junction records were deleted, an error was shown on downloading the Targets Excel Upload Download template. This has been fixed such that the Targets Upload Download Excel template can be successfully downloaded with uneditable white cells displayed in the Target columns for those Project Indicators whose Project Indicator Reporting Periods have been deleted.
INDMP-10395 - Getting issue details... STATUS
Correct/ Accurate values are displayed in the Total column on the Targets Upload/Download Excel template for Percent sex disaggregated indicators without refreshing the component
INDMP-11190 - Getting issue details... STATUS
Baseline values are now visible on Add Results LWC when Compared with Baselines when Targets are Disaggregated is set as FALSE
INDMP-11211 - Getting issue details... STATUS
Summary values are now displayed in the Targets Excel Upload/Download template for Percent Indicators with Calculate Total == Dont Sum Total
INDMP-10864 - Getting issue details... STATUS
Target values are now visible on the Excel Upload/Download template when it is downloaded for a single Project Indicator that is cross disaggregated by sex
INDMP-10407 - Getting issue details... STATUS
Baseline values are now displayed on AR LWC if Reporting Frequency and Target Frequency are different
INDMP-10394
-
Getting issue details...
STATUS
Submissions
Create submissions in bulk from a template
TADD-39 - Getting issue details... STATUS
Special characters print correctly in the downloaded submission word file
INDMP-3349 - Getting issue details... STATUS
Users can now submit a submission response form with multiple sections that contain conditionally displayed questions
INDMP-10487 - Getting issue details... STATUS
Submission reponse form now loads correctly for users that use languages other than English
INDMP-11274 - Getting issue details... STATUS
Users can now submit a submission response form when a conditionally displayed Date type question is left blank or skipped
INDMP-11192 - Getting issue details... STATUS
Cloned submissions now follow the copied conditional display logic correctly
INDMP-11213 - Getting issue details... STATUS
The Last Modified by field is not updated to the user who last viewed the record anymore
INDMP-10177 - Getting issue details... STATUS
Activities
Users only see the baseline bar on the activity gantt chart when they have access to the planned start and end dates
INDMP-9238 - Getting issue details... STATUS
Users can now change the milestone due date by dragging it on the activity gantt chart
INDMP-8041 - Getting issue details... STATUS
Show custom errors to users on activity table
TADD-65 - Getting issue details... STATUS
Cross Cutting Features
Components are automatically refreshed to locked state after they are submitted via Submit Project wizard
INDMP-10846 - Getting issue details... STATUS
Release Updates
Vera Solutions will no longer enhance or resolve any issues for the following components after the component’s end-of-servicing date.
Why: We are focusing development efforts on optimizing the corresponding Lightning Web Components that offer better performance and experience, and introducing new features.
How: Before a component’s end-of-servicing date, you must migrate to the corresponding Lightning Web Components to ensure you continue receiving regular updates and enhancements to those features.
Name | Type of Component | Corresponding LWC | End of Servicing Date |
| Aura Component |
| November 2023 |
| Visualforce Page |
| November 2023 |
| Visualforce Page |
| November 2023 |
| Aura Component |
| April 2024 |
| Aura Component |
| April 2024 |
| Visualforce Page |
| August 2024 |
| Visualforce Page |
| November 2024 |
Packaging Changes
<To be added by Anuranjani>